ALLinBOX 1612 v2
Technical Support:
12
2
CONFIGURATION
To begin with the parameterisation process of the device, it is necessary, once the ETS
program has been opened, to import the database of the product. Next, the device
should be added to the project where desired.
The configuration of this device is done both in the parameters tab and in the ETS
properties. The following sections explain how to configure each of the device
functionalities.
2.1
KNX TO IP INTERFACE
ALLinBOX 1612 v2 is an interface device intended for the
interconnection between a
KNX bus and an Ethernet network (LAN).
The network parameters can be configured in the "IP" panel of the ETS "Properties":
Figure 3
IP Configuration
Obtain an IP address automatically
2
.
ALLinBOX 1612 v2 will automatically
take an IP address whenever there is a DCHP server in the local network to
which it is connected.
2
The default values of each parameter will be highlighted in blue in this document, as follows:
[
default
/rest of options
].
