ALLinBOX 1612 v2
Technical Support:
21
2.6
OUTPUTS
ALLinBOX 1612 v2 incorporates
16 relay outputs
, each configurable as a:
Individual binary output
, which provides an independent control of a load
(up to 16 different loads can be controlled).
Shutter channel
, which enables the control of the motion of one blind (up to
8 blinds can be controlled).
Fan Coil modules
, to control fan coils fan and valve (up to 2 modules can be
controlled).
Figure 11.
Outputs screen.
Each channel can be configured through the drop-down list as two independent
binary
outputs
or as a
shutter channel
(which makes use of both relays).
ALLinBOX 1612 v2 incorporates
fan coil control modules
, which will be responsible
for operating the relays than open and close the water pipe valves (either one three-
point valve or up to two on-off valves), and the relays that set the fan speed level. The
latter can be achieved through
relay accumulation
(more relays closed means a
higher fan speed) or through
relay commutation
(one specific relay will be available
per level), depending on the configuration. The relays distribution for the valves control
is shown in the following table for every possible parameterisation:
