37
ZCM4821-001_v01
Do not pull the brewing unit or use it for carrying.
●
Grip the lower front part of the brewing unit and pull it out to the front. Use your other
hand to stop it from falling out.
●
Turn the brewing unit round. The brewing unit is open and the ejector folded down.
The two stainless steel screens are now freely accessible.
If the brewing unit is closed, you can loosen it on the back with the help
of the tool function on the measuring spoon. Push the toothed opening on
the measuring spoon onto the pin and loosen it by turning completely at
least 3 times.
●
Clean the opened brewing unit under warm running water. In particular, the stainless
steel screens must be rinsed out well to remove any coffee residue.
●
Shake the brewing unit lightly under water.
Recommendation: soak the brewing unit for approximately half an hour in hot water
containing a mild washing-up liquid.
●
Dry the brewing unit.
●
Replace the brewing unit by turning it into the right position (the outlet tube facing
downwards and to the front), insert the brewing unit into the guide grooves and push it
completely into the coffee machine.
●
Push the waste container into the coffee machine and close the door.
You can only switch on the coffee machine when the brewing unit is fitted
and the door with coffee dispensing unit is closed. After switching on, the
brewing unit is adjusted and the normal heating process starts. During
preparation of the first coffee after cleaning, an increased amount of water
runs into the waste container.
RUNNING THE CLEANING PROGRAM
The cleaning programme enables intensive cleaning of otherwise inaccessible areas. The
cleaning programme must be started when the following symbol appears on the display:
The cleaning process takes approx. 8 minutes and should not be
interrupted.
Before running the cleaning programme, the metal sieves in the brewing
unit must be clean and wiped dry.
The cleaning water is collected in the drip tray. Alternatively, you can place a receptacle
(>350 ml) under the spout. Only empty the receptacle when the coffee machine indicates
that the drip tray must emptied.
Damage to the coffee machine and remnants left in the water by use of
the wrong cleaner! Use only recommended cleaners. If other cleaning
solutions are used, manufacturer assumes no liability for any damage
caused.
To run the cleaning programme, follow the instructions on the display and proceed as
follows:
●
Press the
menu button. The following appears on the display:
●
Press the
A
or
C
buttons repeatedly until the “Cleaning programme” menu appears for
selection. The following appears on the display:
●
Press the button
B
or the
button to select the cleaning programme. The following
appears on the display:
You can cancel programme selection by pressing the
menu button as
long as the STOP sign is being displayed.
●
Press the button
B
or the
button to run the cleaning programme. The following
appears on the display:
●
Remove the water tank, fill it completely with clean cold water and push it back in.
The following appears on the display:
●
Open the lid of the coffee bean container and the coffee powder shaft.
●
Put a cleaning tablet into the coffee powder shaft.
●
Then press the button
B
or the
button. The following appears on the display:
The brewing unit is positioned. The following then appears on the display:
Содержание ZCM4821B
Страница 43: ...ZCM4821 001_v01 ...