Zelmer ZCM4821B, Руководство пользователя

Страница: 42 / 44

42
ZCM4821-001_v01
Display Cause Remedy
“Water tank empty” does
not appear in the display
despite an empty water
tank.
●
Too much moisture in
the water tank shaft.
●
Remove water tank and
dry off thoroughly. Dry the
water tank shaft thoroughly
on the inside.
“Empty waste container”
displayed after less than
8 dispensed coffees.
●
Waste container was
emptied while the coffee
machine was switched off.
●
Empty the waste container
only when the coffee
machine is switched on.
Water in the waste
container.
●
Water leaks into the
waste container during
each rinsing process.
●
No remedy necessary
(technical reasons).
Coffee dispensing too
slow.
●
Grinding fineness set
too fine.
●
Set coarser grinding
fineness.
●
Grinding quantity set
too high.
●
Set ground coffee
quantity lower.
● Water system is
calcified.
● Run the descaling
programme.
Water runs into the
waste container instead
of through the coffee
spout during rinsing when
switching the coffee
machine on and off.
● Brewing unit is blocked
or maladjusted.
● Adjust the brewing unit.
See also.
Coffee machine switches
off after rinsing or
dispensing coffee.
●
Pressure in brewing unit
too high.
●
Remove and clean the
brewing unit. If the brewing
unit is closed, open before
cleaning. Unscrew the
brewing unit at the black
tooth pin. An opened
brewing unit is illustrated in
section “CLEANING THE
BREWING UNIT”.
Coffee machine cannot be
switched on.
●
Not plugged in.
●
Insert the mains plug.
● Coffee dispensing unit
not installed.
● Install coffee dispensing
unit.
● Brewing unit not fitted. ● Install brewing unit.
●
Brewing unit was not
pushed in completely.
●
Push the brewing unit in
until it stops.
Coffee dispensing is very
uneven or only one-sided.
● Spout is clogged or
blocked by foreign bodies
(e.g., coffee bean or
similar).
● Pull the coffee spout
upwards and clean the
inside or remove the
foreign body (e.g., coffee
bean).
Storage
If you do not intend to use the coffee machine for a prolonged period, clean it as described
in section “Cleaning and maintenance” in order to prevent mould from building up.
Mould is harmful to health. Store the coffee machine and all accessory parts in a dry, clean
and frost-free place which is protected against direct sunlight.
Ecology – environment protection
Each user can protect the natural environment. It is neither difficult nor
expensive.
In order to do it: put the cardboard packing into recycling paper container;
put the polyethylene (PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal centre, because
of the dangerous elements of this appliance, which can be hazardous for
natural environment.
Do not dispose the appliance with the municipal waste!
The importer/manufacturer does not accept any liability for any damages resulting from unintended use
or improper handling.
The importer/manufacturer reserves his rights to modify the product any time in order to adjust it to
law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without
notifying in advance.