39
ZCM4821-001_v01
The descaling solution is fed into the drip try via the coffee dispensing
spout. Empty the receptacle when the coffee machine indicates that the
drip try must be emptied.
The following then appears on the display:
●
Remove and empty the drip tray or the collection receptacle (> 350 ml).
●
Push the drip tray into the coffee machine as far as indicated on the display or place
the receptacle under the spout again.
●
Press the button
B
or the
button to continue the descaling programme.
The following appears on the display:
●
Remove the water tank and rinse it thoroughly.
●
Fill the water tank with fresh water and put it back again.
●
Press the button
B
or the
button to continue with the descaling programme.
Phase 2: Rinsing
The following appears on the display:
The rinsing solution is fed into the drip try via the coffee dispensing spout.
Empty the receptacle when the coffee machine indicates that the drip try
must be emptied.
The following symbols appear on the display:
●
Remove and empty the drip tray or the collection receptacle (> 350 ml).
●
Push the drip tray into the coffee machine as far as indicated on the display or place
the receptacle under the spout again.
●
Press the button
B
or the
button to complete the descaling process.
The following appears on the display and flashes 3x to confirm:
The descaling programme has completed.
●
Clean the brewing unit as described in chapter “CLEANING THE BREWING UNIT”.
Residues of descaler may cause damage to the brewing unit in the long
run! It is imperative that you rinse the brewing unit thoroughly after every
descaling process.
The coffee machine is now ready for operation again and returns to the last selected
coffee mode.
The following appears on the display:
In the event of a power failure during descaling, the programme has to be
restarted!
CLEANING THE NOZZLE OF THE MILK FROTHER
To clean the the nozzle of the milk frother, proceed as follows:
●
Press the left side of the door with the coffee dispensing unit to open it.
●
Pull the milk hose out of the milk frother.
●
Fold the lever on the milk frother upwards and pull the milk frother out towards you.
●
Remove the lid
1
from the milk frother.
●
Remove the milk frother nozzle from the milk frother by inserting the rounded end of
the measuring spoon into the slot of the milk frother nozzle and turning 45° to pull it
out. The nozzle is lifted up slightly during turning so that it can removed more easily.
1
Содержание ZCM4821B
Страница 43: ...ZCM4821 001_v01 ...
