INTRODUCTION
Axioskop 2 FS
plus
Carl Zeiss
Notes on instrument safety
Axioskop 2 FS
MOT
0-8
B 40-076 e 02/01
Notes on instrument safety
The Axioskop 2 FS
plus
and Axioskop 2 FS
MOT
microscopes were designed, produced and tested in
compliance with DIN 61010-1 (IEC 1010-1), Safety requirements for electrical measuring, control and
laboratory instruments, and meet the requirements of appendix I of directive 73/23/EC and the relevant
CSA and UL directives. The instruments meet the requirements of the EC directive 89/336/EC and the
EMC legislation of November 9th, 1992. This operation manual includes information and warnings which
must be observed by the user.
The following warning and information symbols are used in this manual:
☞
NOTE
This symbol is a warning which you must observe under all circumstances.
CAUTION
This symbol is a warning which indicates a hazard to the instrument or instrument system
.
CAUTION
This symbol is a warning which indicates a hazard to the user of the instrument
.
CAUTION
Hot surface
!
CAUTION
UV radiation is emitted
!
CAUTION
Disconnect the instrument from the line before opening it!
Содержание Axioskop 2 FS plus
