Zeiss Axioskop 2 FS plus, Руководство пользователя

Страница: 41 / 128

Axioskop 2 FS plus START-UP
Axioskop 2 FS
MOT
Initial start-up Carl Zeiss
B 40-076 e 02/01 2-9
2.1.6 Attachment of the condenser
It is recommended to remove the stage carrier
before you insert the condenser.
•
Remove the stage carrier (if not yet done - see
2.1.4) and safely place it on the table.
•
Use lever (2-6/ 8 ) to fold out the front lens on
the condenser. Unscrew both centering screws
(2-6/
3 ) until their ends are no longer visible.
•
Move condenser carrier (2-6/ 2 ) to the lowest
position via drive for height adjustment (2-6/ 5 ).
•
Insert condenser (2-6/ 1 ) between condenser
carrier (2-6/ 2 ) and stage carrier (2-6/ 4 ). Orient
the locking screw on the underside of the
condenser in the direction of the groove
(2-6/
7 ).
•
Press dovetail of condenser against the spring
mount (2-6/
6 ) of the condenser carrier until the
condenser can be placed on the condenser
carrier horizontally.
•
Let condenser go smoothly; the screw will lock
in position in the groove (2-6/
7 ) at the front.
•
Screw in centering screws until they engage in
the dovetail of the condenser.
Proceed in the same way when attaching the
achromatic condenser 0.8 H D Ph DIC (2-7/
1 ). The
item numbers 2 to 7 in Fig. 2-7 are identical to
those in Fig. 2-6.
☞
Attach stage carrier again only after
insertion of the DIC slider.
Fig. 2-6 Attachment of universal condenser
Fig. 2-7 Attachment of achromatic
condenser 0.8 H D Ph DIC