Zeiss Axioskop 2 FS plus, Руководство пользователя

Страница: 57 / 128

Axioskop 2 FS plus START-UP
Axioskop 2 FS
MOT
Attachments and conversions Carl Zeiss
B 40-076 e 02/01 2-25
2.2.3 Changing the DIC prism in the
universal condenser
•
To loosen the cover on the condenser underside
(2-32/
1 ), loosen both grub screws using the
SW 2 screwdriver and remove the cover.
Position the turret disk containing the DIC prism
to be exchanged in the exchange opening and
hold it on the knurled ring.
•
Unscrew retainer ring using the so-called
double-function tool (2-32/
4 ).
•
Now screw the tool in the prism mount
(2-32/
3 ) with the threaded side (2-32/ 4 ) and
pull out DIC prism (2-32/ 2 ).
•
Remove DIC prism (2-32/ 2 ) from the tool and
screw on the new, required DIC prism.
•
Installation of the DIC prism is made in reverse
order. Make sure that the DIC prism is oriented
correctly (groove 2-32/
5 must engage in the
pinion of the mount). Make sure that the
knurled ring of the turret disk is labelled
correctly.
2.2.4 Attachment of filter mount
•
Hold filter mount (2-33/ 5 ) parallel to the
underside of the condenser carrier (2-33/ 3 ) and
screw holding pin (2-33/ 4 ) of the filter mount
(2-33/ 5 ) into the front threaded hole on the left
below the condenser carrier (2-33/ 3 ) until stop
using the SW 2 angled Allen key (2-33/ 6 ).
•
Use adjusting lever (2-33/ 1 ) to screw stop bolt
(2-33/ 2 ) into the rear threaded hole of the
condenser carrier until stop.
Fig. 2-32 Changing the DIC prism
Fig. 2-33 Attachment of filter mount