Zeiss Axioskop 2 FS plus, Руководство пользователя

Страница: 62 / 128

START-UP Axioskop 2 FS plus
Carl Zeiss Attachments and conversions Axioskop 2 FS
MOT
2-30 B 40-076 e 02/01
2.2.9 Changing the mechanical stage
Depending on type, mechanical stages can be
fixed or they can be rotated or centered. The
movement range is 75 mm in x-direction and 50
mm in y-direction. The drive is either on the right
or left for fixed stages. The drive is on the right on
stages that rotate.
(1) Fixed mechanical stage 75x50 R
a) Removing the stage
•
Unscrew 4 fixation screws (2-41/ 5 ) on the stage
carrier (2-41/ 6 ) using angled SW 3 Allen key
(2-41/ 4 )
•
Remove stage (2-41/ 1 ) from the stage carrier in
upward direction.
b) Attaching the stage
•
Attach stage (2-41/ 1 ) to stage carrier (2-41/ 6 ) in such a way that the threaded holes (2-41/ 2 ) on the
underside of the stage are positioned above the openings of the stage carrier (2-41/ 3 ).
•
Insert four fixation screws (2-41/ 5 ) through the stage carrier from below and screw them in the stage
underside; use the shorter screws on the front.
•
Orient stage in x-y direction and tighten the fixation screws.
(2) Rotary mechanical stage 75x50/240° R
a) Removing the stage
•
Loosen screwing cap (2-42/ 2 ) of spring housing
with approx. 3 rotations.
•
Press stage to the front against spring pin
(2-42/
1 ), lift it off the stage carrier (2-42/ 3 ) at
the back and remove it in upward direction.
•
Tighten screwing cap (2-42/ 2 ).
b) Attaching the stage
•
Loosen screwing cap (2-42/ 2 ) of spring housing
with approx. 3 rotations.
•
Attach stage to the spring pin (2-42/ 1 ) via
dovetail groove.
Fig. 2-41 Changing the fixed mechanical
stage
Fig. 2-42 Changing the rotary mechanical
stage