Zehnder Group ComfoAir 550 Luxe, Руководство пользователя

Страница: 43 / 48

Part 2b – Inspection of Installation
This section should be completed by the commissioning engineer prior to completing Part 3.
2.3a Visual Inspections – General (all Systems)
Total installed equivalent area of background ventilators in dwelling mm
Total fl oor area of dwelling m 2
Does the total installed equivalent ventilator area meet the requirements
given in Tables 5.2a, 5.2b, or 5.2c in ADF? Yes No
Have all background ventilators been left in the open position? Yes No
Have the correct number and location of extract fans/terminals been instal-
led that satis
fi es Table 5.2a in ADF?
Yes No
Is the installation complete with no obvious defects present? Yes No
Do all internal doors have suf fi cient undercut to allow air transfer between
rooms (i.e. 10 mm over and above fi nal fl oor fi nish)
Yes No
Has all protection/packaging been removed (including background ventila-
tors) such that system is fully functional? Yes No
For ducted systems, has the ductwork installation been installed in such
manner that air resistance and leakage is kept to a minimum? Yes No
Are the correct number and size of background ventilators provided that
satisfy ADF? Yes No
Has the entire system been installed such that there is suf fi cient access for
routine maintenance and repair/replacement of components?
Yes No
2.3a Visual Inspections – General (Systems 3 and 4 only)
Have appropriate air terminal devices been installed to allow system ba-
lance? Yes No
Has the heat recovery unit (System 4 only) and all ductwork been effectively
insulated where installed in unheated spaces? Yes No
Condensation connection is complete and drains to an appropriate location
(System 4 only)? Yes No
2.3c Other Inspections – General (System 1, 3 and 4 only)
Upon initial start up, was any abnormal sound or vibration experiences, or
unusual smells detected? Yes No