Zehnder Group ComfoAir 550 Luxe, Руководство пользователя

Страница: 30 / 48

3
EN - 26 - For the installer
3.8 Programming air specifi cations
After installation, the ComfoAir must be programmed.
This can be done using the air specifi cations of the ComfoAir above.
15%
20%
30%
40%
60%
50%
70%
80%
90%
100%
0
20
100
40
300
200
100
0
0
2
Pst
Pa(N/m )
800
700
500
400
200
60
m /h
3
300
l/s 80
q v
400
100 120
600
160
600
140
500
ComfoAir 550
The default settings of the ComfoAir are:
Position A
BSENT
15%
Position L
OW
35%
Position M
EDIUM
50%
Position H
IGH
70%
The default settings of the ComfoAir, HL, are:
Position A
BSENT
15%
Position L
OW
40%
Position M
EDIUM
70%
Position H
IGH
90%
Follow this procedure to programme the ComfoAir
(after installation):
•
Set the ComfoAir in programming mode.
– CC Ease: Press simultaneously for 3 seconds
on " " and " " untill “InR” appears on
the CC Ease panel.
In programming mode, the bypass and pre-
heater valves are always closed. After 30
minutes, the ComfoAir automatically termi-
nates the programming mode.
• Close all windows and outside doors.
• Close all inside doors.
• Check whether both fans function in the three
speed settings.
• Switch the ComfoAir to high speed.
• Install all valves and set the valves according
to the settings.
•
Change the fan settings in P menus P30 to P37
on the digital operating device.
– Select the lowest possible setting in order
to conserve energy.
– Ensure that the ratios between low, medium
and high remain equal.
Use the chart of the ComfoAir's air speci fi ca-
tions to set the fans.
• In the event that the currently set air volumes
still deviate too much:
– Adjust the valves.
• Check the entire installation again, after all
valves have been set.
• Switch the ComfoAir (back) to ventilation posi-
tion 2.