Zehnder Group ComfoAir 550 Luxe, Руководство пользователя

Страница: 24 / 48

3
EN - 20 - For the installer
3.7 Commissioning the ComfoAir
After installation, the ComfoAir must be commis-
sioned.
This can be done via the P menus on the digital op-
erating device. These P menus can be used to enter
various settings (ventilation programmes, in partic-
ular) for the ComfoAir. An overview of the available
P menus is given below:
Menu Options
P1 Reading statuses (from menu P2)
P2 Setting time delays
P3 Setting the ventilation levels
P4 Reading the temperatures
P5 Setting additional programmes
P6 Setting additional programmes
P7 Reading and resetting malfunctions (and
system information)
P8 Setting 0-10V inputs
P9 Reading statuses (from menu P5)
P menus P1, P2 and P9 can be accessed by the
user, mainly to read statuses and set time delays.
The remaining P menus P3 to P8 are intended
sole-
ly for the installer.
The ComfoAir's bypass valve will not work
for the
fi rst 4 minutes after a power cut un-
less the programme mode is activated.
3.7.1 CC Ease panel
Accessing the P menus
1 Press " " and " " simultaneously.
2 Wait until the "P menu" appears on the display.
P menus P1, P2 and P9 can now be
accessed
.
3 Press and hold " " and " " for 2 sec-
onds, simultaneously.
4 Wait until “P menu” P3 appears on the
display.
P menus P3 to P8 can now be accessed
.
5 Select using " " or " " the desired
e.g., P menu “ 5 ”.
6 Press " " to confi rm the P menu.
7 Select using " " or " " the desired
e.g., P sub-menu “ 51 ”.
8 Press " " to confi rm the P sub-menu.
Entering settings in P menus
The minimum and maximum values for the
available settings parameters are preset in
the software.
9 Select a value for the parameter using " "
or " ".
10 Press " " to confi rm.
11 Repeat steps 5 to 10, to set multiple parameters
in succession.
Or
Press " " to return to the P menu.
Returning to the main menu
12 Press " " twice.