Zehnder Group ComfoAir 550 Luxe, Руководство пользователя

Страница: 28 / 48

3
EN - 24 - For the installer
(Malfunction) information values
Submenu Description Minimum Maximum Default
P75 General reset.
• Press " " on the CC ease
panel for 5 seconds to carry
out a general reset.
All original factory settings are re-
stored following a general reset.
0 1 0
Note:
After a general reset, the ComfoAir will ask you to reset the “nL / HL” (see
P56) and “Li / Re” (see P57) settings.
Following a general reset, all settings in menus P2 and P3 and the pro-
grammes in P5 and P6 will need to be reset.
If the ComfoAir is fi tted with a pre-heater, this must be recon fi rmed in menu
P51, as this setting defaults to not fi tted after a general reset.
P76 Self-test of the ComfoAir. 0 1 0
Note:
Directly after activation of the self-test, the ComfoAir switches to its highest speed.
Immediately after activating the self-test, the bypass valve opens and closes. If the
self-test is successful, the valve of the pre-heater opens and closes (if fi tted).
P77 Resetting fi lter dirty counter. 0 1 0
Note:
This resets the counter that triggers a dirty fi lter alert on the ComfoAir. This allows the
fi lter to be cleaned or replaced before the dirty fi lter alert appears.
Menu P8 Settings
(Malfunction) information values
Series No. Description Minimum Maximum Default
810 Analogue input 1
0= not fi tted 1 = fi tted 0 1 0
811 0= control 1 = programme
(analogue input ) 0 1 0
812 set point analogue input 1
(programme) 0 100 50
813 min. setting analogue input 1 0 99 0
814 max. setting analogue input 1 0 100 100
815 0=positive analogue input 1
1=negative setting analogue
input 1 0 1 0
816 read-out analogue input 1 0 100 -
820 Analogue input 2
0= not fi tted 1 = fi tted 0 1 0
821 0= control 1 = programme
(analogue input 2) 0 1 0
822 set point analogue input 2
(programme) 0 100 50
823 min. setting analogue input 2 0 99 0
824 max. setting analogue input 2 0 100 100
825 0=positive analogue input 2
1=negative setting analogue
input 2 0 1 0
826 read-out analogue input 2 0 100 -
830 Analogue input 3
0= not fi tted 1 = fi tted 0 1 0
831 0= control 1 = programme
(analogue input 3) 0 1 0