Zehnder Group ComfoAir 550 Luxe, Руководство пользователя

Страница: 11 / 48

2
For the user - 7 - EN
2
2.3 Operating the CC Ease panel
The CC Ease panel is used for the following:
•
Reading and setting the day and time;
• Reading and setting the comfort temperature;
• Reading and setting the ventilation volume;
• Activating the Boost setting;
• Switching the supply and exhaust fan on/off;
• Setting a personal ventilation programme;
• Setting additional ventilation programmes/ op-
tions in the P menus.
A concise explanation of the above listing is given
in the paragraphs below.
2.3.1 Setting the date and time
1. Press " " longer than 2 seconds.
2. Wait until the day, e.g. “Sa”, starts blinking.
3. Select the correct day using " " or " ".
4. Press and briefl y hold " ".
5. Wait until the hour, e.g. “ ”, starts fl ashing.
6. Select the correct hour using " " or
" ".
7. Press and briefl y hold " " again.
8. Wait until the minutes, e.g. " ", fl ash.
9. Select the correct minutes using " " or
" ".
10 Press and briefl y hold" " again to return.
2.3.2 Reading and setting the comfort
temperature
The comfort temperature can be read, but also set
to the desired temperature. After entering the set-
ting, the ComfoAir will automatically work to the
temperature set.
Reading the comfort temperature
1. Press " " briefl y.
2. Wait until the comfort temperature appears.
3. Press " " again to return.
Setting the comfort temperature
1. Press " " longer than 2 seconds.
2. Wait until the comfort temperature, e.g.
“ ”, fl ashes.
3. Select the desired comfort temperature using
" " or " ".
4 Press and briefl y hold " " to confi rm.
2.3.3 Reading and setting the ventilation
volume
Reading the ventilation volume
The current ventilation volume, e.g. “2 ”, will always
be displayed on the CC Ease panel. Normally the
ComfoAir will regulate the required ventilation vol-
ume automatically. During automatic ventilation
mode
“AUTO” will be displayed on the CC Ease
panel.
In addition to showing the programmed ventilation
setting, the CC Ease panel also displays whether
a temporary control system (such as a CO
2
sensor
or a bathroom switch) is overriding the ventilation
setting.
In the event a required ventilation setting is being
overridden by a time delay function (such as the
bathroom switch overrun timer). a ‘t’ is displayed in
the bottom right-hand corner of the CC Ease panel.
In the event a required ventilation setting is being
overridden by a signal from a sensor (such as a CO
2
sensor), an ‘A’ is displayed in the bottom right-hand
corner of the CC Ease panel.