Zapi ACE3, Руководство пользователя

Страница: 132 / 139

Page – 132/139 AFFZP0BB – ACE3 – User Manual
From top:

First line tells which firmware version is running inside the console, in this case
ZP 0.15.

RS232 Console: enter this menu to start a serial connection as in the Console
Ultra.

CAN Console: enter this menu to establish a CAN connection.

AUTOSCAN CAN: another way to establish a CAN connection.

Console Utilities and Menu Console: ignore them at the moment.

The current hour is shown at the bottom right.
Moreover, the green LED is on and still.
The “RS232” line is already highlighted at the start-up. Press OK key to start a serial
connection.
Display prompts a message to inform you that a connection attempt is ongoing.
If serial connection fails a “NO COMMUNICATION” warning will be shown after
some seconds: press ESC key and look for what is preventing the connection.
4
Please notice the red dot appearing on the top right of the display every time you
press a button. It indicates that the console has received the command and it is
elaborating the request. If the red dot does not appear when a button is pressed,
there is probably a failure inside the keyboard or the console has stalled.
12.2.4 Connected
If connection is successful, the display will show a page similar to the next one.
This menu shows basic information about the controller, in a similar way to the
console Ultra.

First line displays the controller firmware.

Second line shows controller voltage, controller current and hour meter.

Last line shows the current alarm code, if present.
Press OK to access the MAIN MENU.