manualshive.com logo in svg

YSI SonTek RiverSurveyor, Системное руководство

Поделиться
Скачать
YSI SonTek RiverSurveyor Скачать руководство пользователя страница 55

SonTek/YSI Inc 

RiverSurveyor System Manual (May 1, 2007) 

43

3.7. 

Internal Recorder 

The following topics are covered in this section: 

• 

What is the internal recorder?

 

• 

How does the internal recorder work with RiverSurveyor?

 

• 

How do I set up the internal recorder in RiverSurveyor?

 

3.7.1.  What is the internal recorder? 

The internal recorder consists of a non-volatile flash-memory card located on an ADP electron-
ics board. Recorder storage sizes range from 128 MB to 1 GB (or more as technology improves). 
The internal recorder is an optional feature within a RiverSurveyor system. The internal recorder 
allows you to store data inside the ADP. 

3.7.2.  How does the internal recorder work with RiverSurveyor? 

RiverSurveyor can use the internal recorder as an additional storage location for data files. Inter-
nal recorder considerations: 

• 

The internal storage of data can be done simultaneously with real-time data collection. 

• 

The additional storage provides a contingency in the event that files stored on your com-

puter are either damaged or lost. 

• 

Note that “external” data (e.g., data from a GPS, echo sounder) or user-input data (e.g., edge 

distances) are not stored to the internal recorder’s files. 

• 

If you choose to use the internal recorder option, it is good practice to download all your 

stored files from the recorder, and then format (i.e., erase) the recorder (to maximize its ca-
pacity) before starting survey site measurements. This can be done using the Recorder mod-
ule within SonTek’s 

SonUtils

 program. 

3.7.3.  How do I set up the internal recorder 
in RiverSurveyor? 

If an internal recorder is installed on your system, 
you can enable/disable this feature via the 

User 

Setup

 dialog box (

Figure 3-20

), which is displayed 

each time you connect to your ADP and run 

River-

Surveyor

. It can also be displayed through 

ADP Con-

figuration|User Setup

. 

On the 

User Setup | Advanced Settings

 tab, use the 

Recorder

 dropdown list to select 

Enabled

 or 

Dis-

abled

. 

Enabled

 stores data to both a file on the re-

corder and to a file on your computer. 

Disabled

 only 

stores data to a file on your computer. 

If the recorder is full, 

RiverSurveyor

 will display an 

error message during the start of the data acquisition 
phase. As such, it is good practice to download your 
data and format the recorder before any measure-
ment period. This can be done using the Recorder 
module in 

SonUtils

. 

Figure 3-20. User Setup dialog box – Advanced 

Settings 

Содержание SonTek RiverSurveyor



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды