YOKOGAWA UV700G, Руководство пользователя

Страница: 58 / 131

<6. Functions>
6-1
IM 12K01B02-01E
6. Functions
This unit has various functions. It is necessary to set various conditions to utilize these functions
fully. This chapter describes the functions and the setting procedures.
6.1 MEAS. (Measurement) Screen
The main screen displayed at the start when the power in ON.
Measurement screen contains two screens; the “CONC.” screen to display the COD
concentration and turbidity concentration, and the “Abs.” screen to display the light absorption of
UV, VIS, and UV-αVIS.
To switch screen, press the [Abs.] and [CONC.] buttons.
When the power is turned ON the CONC. screen is displayed. The previous measurement item
is memorized when the menu is switched.
[Abs.]
[CONC.]
6.2 Table of Functions
Thoroughly understand the functions and set the functions so as to meet the customer’s needs.
Alarm
Description Reference Function
Setting
Sets signal reception and allocation from exterior,
and input and output setting during operation.
“6.4 Maintenance - Setting”
Measurement
setting
Sets the measurement range, unit, and upper and
lower limit for UV, VIS, COD, and TURB (turbidity).
“6.5 Maintenance -
Measurement Setting”
Action
Checks ON/OFF of motor for wipers and UV lamp. “6.6 Maintenance - Action”
Check
Checks the unit information and input and output
operation.
“6.7 Maintenance - Check”
Log data Checks the measurement data saved in the memory.
“6.8 Data Check”
Graph
Displays graphs of the measurement data saved in
the memory.
Calibration
report
Displays the calibration report saved in the memory.
CF card
Saved the memorized data on the CF card or
initializes the CF card.
Alarm Immediately displays the alarm being triggered.
Alarm history Displays the alarm history saved in the memory.
“6.9 Alarm”
Maintenance
Data