YOKOGAWA UV700G Скачать руководство пользователя страница 2

Страница: 2 / 131

IM 12K01B02-01E

<INTRODUCTION>



INTRODUCTION

This manual describes the operation of the UV700G.
Be sure to read this manual before using the product to ensure proper and safe operation of the

instrument. Also safely store the manual so it is readily available whenever necessary.

Product specifications and appearance, as well as the contents of this manual are subject to

change without notice.

Warranty and Responsibility

Yokogawa warrants that the Product shall be free from defects in material and workmanship and

agrees to repair or replace free of charge, at Yokogawa’s option, any malfunctioned or damaged

Product attributable to Yokogawa’s responsibility for a period of one (1) year from the delivery

unless otherwise agreed with a written agreement. In any one of the following cases, none of the

warranties set forth herein shall be extended;

• Any malfunction or damage attributable to improper operation

• Any malfunction attributable to repair or modification by any person not authorized by

Yokogawa

• Any malfunction or damage attributable to the use in an environment not specified in this

manual

• Any malfunction or damage attributable to violation of the instructions in this manual or

operations in the manner not specified in this manual

• Any malfunction or damage attributable to any cause or causes beyond the reasonable

control of Yokogawa such as natural disasters

• Any deterioration in appearance attributable to corrosion, rust, and so on

• Replacement of consumables

YOKOGAWA SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM ANY MAL-

FUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA, OR ANY OTHER USES OF THE

PRODUCT.

Notes on Handling User’s Manuals

• Please hand over the user’s manuals to your end users so that they can keep the user’s

manuals on hand for convenient reference.

• Please read the information thoroughly before using the product.

• The purpose of these user’s manuals is not to warrant that the product is well suited to any

particular purpose but rather to describe the functional details of the product.

• No part of the user’s manuals may be transferred or reproduced without prior written con

sent from YOKOGAWA.

• YOKOGAWA reserves the right to make improvements in the user’s manuals and product at

any time, without notice or obligation.

• If you have any questions, or you find mistakes or omissions in the user’s manuals, please

contact our sales representative or your local distributor.

Media No. IM 12K01B02-01E

6th Edition : Feb. 2021 (YK)

Содержание UV700G




































































































































Результаты поиска

Содержание UV700G

Отзывы:

Похожие инструкции для UV700G

Бренды по названию

Популярные бренды

YOKOGAWA UV700G, Руководство пользователя

Результаты поиска

Содержание UV700G

Отзывы:

Похожие инструкции для UV700G

Бренды по названию

Популярные бренды