YOKOGAWA UV700G, Руководство пользователя

Страница: 116 / 131

<App.1 Overview>
App.1-1
IM 12K01B02-01E
App.1 Overview
App.1.1 Cautions
This manual provides the procedure for assembling and installing the UV meter and pole stand,
and cautions.
To obtain stable operation and reliable measurement of the UV meter for a long period of time,
you need correct installation work from setup through piping.
If the meter is not installed correctly, unexpected problems may occur such as incorrect analyzer
indications, frequent malfunctions, and increases in required inspection and maintenance.
Problems due to incorrect installation or use are not covered by the warranty. Be sure to fully
follow the manual.
App.1.2 Composition
For UV700G installation, both the UV meter itself and UV700G pole stand are required.
The following table shows the components included with the UV meter and pole stand.
Table 1 Components included with UV meter
Component Name Specifications Quantity
Operation unit UV700G operation unit Standard specification (outdoor case) 1
Analysis unit UV700G analysis unit 1
Overflow tank
Overflow tank Float switch 1
U bolt (large) set M8, screw nut 2
Pipe stay set Pipe, U bolt, screw nut 1
Hose set 1.2 m, with one-touch joint 1
Measuring tank
and accessory
Measuring tank 1
Blind plate 1 1
Calibration tank 2
V-4 pipe set V-4 valve, pipe 1
V-2 pipe set V-2 valve, T-pipe 1
Y-pipe set Y-pipe, hose clip 1
M8 bolt set Used for attaching the measuring tank 4
Accessories for analysis unit
Drying agent, calibrating solution,
wiper, washer
1
UV700G User’s Manual Standard specification 1
Table 2 Components included with the pole stand
Component Name Specifications Quantity
Pole stand UV700G pole stand Standard specification 1
Detector mount,
Converter bracket
UV700G detector mount Detector mount 1
Converter bracket Converter bracket 1