2-24
IM 701450-51E
2.5 Analyzing/Searching Data
Setting the Field or Frame to Be Used as a Search Condition
28.
Use
jog shuttle & SELECT
to select whether to use the field or frame of
Identifier, RTR, Data Field, ACK and Error Frame as search conditions.
•
Highlighting of the mark to the left of each item indicates that it is used as a search
condition.
•
Multiple fields or frames can be selected together, but the RTR and Data Field cannot
be turned ON at the same time. If either one is turned ON, the other is turned OFF.
• When Identifier Is Selected
29.
Use
jog shuttle & SELECT
to set the Identifier bit pattern.
•
If you selected Hex for Pattern Format in step 27, turn the jog shuttle to select 0 to 9, A
to F, or X, and press SELECT. Pressing RESET will reset the value to X (the initial
value).
•
If you selected Bin for Pattern Format in step 27, press SELECT to select 0, 1, or X.
• When Data Field Is Selected
30.
Use
jog shuttle & SELECT
to set the number of valid bytes of the data field to a
value between 1 and 8 (DLC box).
31.
Use
jog shuttle & SELECT
to set the data field bit pattern.
•
If you selected Hex for Pattern Format in step 27, turn the jog shuttle to select 0 to 9, A
to F, or X, and press SELECT. Pressing RESET will reset the value to X (the initial
value).
•
If you selected Bin for Pattern Format in step 27, press SELECT to select 0, 1, or X.
• When ACK Is Selected
32.
Use
jog shuttle & SELECT
to select whether to search for frames returning
Acknowledge (Y) or frames not returning Acknowledge (N) (ACK box).
Set the Identifier bit
pattern.
Select the field or
frame to be used as a
search condition.
Set the number of valid
bytes of the Data Field
in the range of 1 to 8.
Set the Data Field bit
pattern.
Set whether to search
frames that have
Acknowledge returned.
33.
Press
ESC
. The Search Setup dialog box closes.
