YOKOGAWA DL716, Руководство пользователя

Страница: 180 / 255

10-11
10
IM 701830-01E
Output of Screen Data
Setting the paper size, plotting size, pen speed and pen assignment (for only HP-
GL format)
7.
Press the “ Plotter Setup ” soft key to display the plotter setting menu.
8. Turn the jog shuttle to move the cursor to “ Paper Size .”
9. Press the
SELECT
key to display the paper size menu.
10. Keep pressing the
SELECT
key to select “ A3 ” or “ A4 .”
11. In the same way, set the “ Plot Size ,” “ Pen Speed ,” “ Dot Connect ,” “ Adjust Top ,”
“ Adjust Right ,” “ Append SP0 ” and “ Pen Select .”
12. If “ Pen Select ” has been set to “ Auto ,” select “ Installed Pen ” or assign pens for “ Grid ”
to “ CH8 ” by turning the jog shuttle (if “ Pen Select ” has been set to “ Manual ”).
Data compression (with TIFF or BMP only)
13.
Press the “ Compression ” soft key to set compression “ ON ” or “ OFF .”
Setting the comment
14.
Press the “ Comment ” soft key to display the keyboard screen.
15. Enter characters using the procedure described on page 4-2.
Outputting the screen data
16.
Display the desired menu screen.
17. Press the
START/STOP
key to stop acquisition.
If the indicator on the
START/STOP
key is lit, acquisition is in progress.
18. Press the
COPY
key to output a hard copy of the screen data.
To stop output, press the “ Copy Abort ” soft key.
10.5 GP-IB/RS-232 Interface : Data Output and Format Selection