YOKOGAWA DL716, Руководство пользователя

Страница: 142 / 255

8-11
8
IM 701830-01E
Display
Operating Procedure
1. Press the
SHIFT+DISPLAY
key (X-Y).
Set the display format
2.
Press the “ MODE ” soft key as necessary to select the format: “ OFF ”, “ T-Y & X-Y ”, or “ X-
Y ”.
3. Press the “ X Trace ” soft key to set the jog shuttle action to “ X Trace. ”
Then turn the jog shuttle to select the X-axis waveform (CH1, ..., Math8).
4. Press the
SELECT
key.
Channels which do not have input modules installed are not displayed on the menu.
Set the display range
5.
Press the “ Start Point ” soft key to set the jog shuttle action to “ Start Point ”.
Then turn the jog shuttle to set the start point.
6. Press the “ End Point ” soft key, and use the jog shuttle to set the end point.
7. If necessary, press the “ Linkage ” soft key to set the linkage “ ON ” or “ OFF ”.
8.8 X-Y Waveform Display