vi
TI 33Q01J10-01E
3.2 Added AFF50S/AFF50D Field Control Units to Terminal Connection
3.3 Added AFF50S/AFF50D figures
Added FG to ANB10S/ANB10D figures
Added FG to ANR10S/ANR10D figures
Added figures with ANR10S/ANR10D installed in general-purpose cabinet
3.5 Corrected coating stripped length data for Pressure Clamp Terminal with a sleeve
Deleted FG from ANR10S/ANR10D figures
3.6.2 Added AAV144, AAV544, and ALP111 module signal cable connections to Table Signal Cables
for Connection with FIO
3.6.3 Added notes to Table Signal Names and I/O Signals of Analog I/O Module
Added resistor to Figure No-Voltage contact Input (1) and changed resistor values in Figure 2-
Wire Power Supply Type for “Connecting Signal Cables with Pulse Input Module AAP135”
3.6.4 Added notes for AKB336 cable length to Connection of Fieldbus Communication Module ALF111
3.7.1 Added I/O module Nests
3.7.2 Added “List of Signal Cables for Connection with RIO”
3.7.3 Added resistor to Figure No-Voltage Input (1) for Connecting Signal Cables with Pulse Input
Module APM11
3.8 Added description of AFF50S/AFF50D to Control Bus Adapter
Added description of V net (10BASE-2) cable, T-type connector, and BNC connector cover
Added Figure ESB Bus Connection (AFF50D)
Added descriptions of Terminator, Clamp Filter, and T-type connector to How to Wiring ER bus
3.10 Added AFF50S/AFF50D and ABC11S/ABC11D devices to Table Status Contact Output
4. Installation Specifications
Deleted Note: For the electrical specifications of the enclosed display style console using CRT
Added AFF50S/AFF50D specifications to Table Electrical Specifications
Added data for AFF50S and AFF50D to Table System Equipment Power-On In-Rush Current
Corrected data for ANR10D in Table System Equipment Power-On In-Rush Current
Corrected 24 V DC data for ANS50/AND50 Node interface unit in Table Breaker Ratings
Added AFF50S and AFF50D Field Control Units to Table Breaker Ratings
Corrected ADV161 data in Table Maximum Power Consumption of FIO
Added data for AAV144, AAV544, and ALP111 to Table Maximum Power Consumption of FIO
Corrected data for YPCKIT in Parts durability
Added data for Control Devices (AFF50
) and Bus Converters (ABC11S and ABC11D) to Parts
durability
Deleted Installation restriction for the high-speed nest for analog I/O modules (Model AMN12)
Deleted Installation restrictions when using thermocouple input multiplexer modules
Deleted Installation restrictions when using thermocouple input (Using 19-inch Rack Mount)
Deleted Restrictions on Loading of Input/Output Modules for RIO
Deleted FIO Node Unit Installation Restriction
Deleted Limitation on installation of ALR111/ALR121/ALE111
Deleted Limitation on installation of Foundation Fieldbus ALF111
Deleted FIO I/O Module Duplexing & Installation
Deleted Protection of FIO Module Vacant Slots
Deleted Limitations of Installation under the Ambient Operating Temperature Conditions
Deleted Ambient Temperature and Operation restrictions of Remote Nodes
Deleted Note for EB401 single configuration
Deleted Restrictions on AAT141 (Thermocouple Input) Installation
Deleted Installed position of AAT141 in cabinet (If node only)
Deleted Installed position of AAT141 in cabinet (If heat generating device exists)
Deleted Restrictions on the Installation of the Combination of AAT145 (Thermocouple Input) and
Terminal Board AET4D
Deleted Installed position of AAT145 in cabinet (If heat generating device exists above the
terminal boards)
Deleted Installed position of AAT145 in cabinet (If heat generating device exists under the
terminal boards)
Deleted Limitations of Installation of Modules with Built-in Barrier
Deleted Limitations of Installation of Modules with Built-in Barrier Imposed by Capacity of Power
Supply to Transmitters
Deleted Limitations of Installation for AST143 (the combination of thermocouple input and
pressure clamp terminal)
5. Post-installation Inspection and Environmental Preservation
Moved description of Floor Plans to External Dimensions (TI 33Q01J10-02E)
Feb. 1, 2001-00