2. Transportation, Storage and Installation
2-8
TI 33Q01J10-01E
2.3
Storage
The delivery date should be determined in accordance with your installation schedule.
Avoid storing products more than three months. If long-term storage cannot be avoided,
consult us in advance because it is necessary to provide waterproofing, condensation
prevention, and dustproofing measures as well as periodical inspections.
Storage Condition
Store products without unpacking. Be sure to confirm that the crate is not damaged. To store
them after unpacking, be sure to take the precautions described below.
Location of Storage
Store products in a warehouse or indoor facilities - never in an open-air location.
Storage Environment
• Avoid direct sunlight.
• Prevent condensation.
• Do not store products where corrosive gas or salty air may be present.
SEE
ALSO
See “Section 1.2 Control Room Environment” for permissible temperature, humidity and temperature fluctuation
of storage area.
Storage of Packed Equipment
• Place squared pieces of lumber with a height of 100 mm or higher on the floor. The lumber
should be long enough so that more than 100 mm remain outside of the crate on every side.
• Securely place unopened crates on the lumber platform.
• Do not stack crates in piles.
• Make sure to provide good air circulation in the storage area and periodically inspect the
crates to keep them under proper conditions.
Storage of Unpacked Equipment
To store unpacked products without power connection, follow the specified environmental
requirements. If stored in a non-air-conditioned room, cover them with polyethylene or other
sheets for protection against dust and moisture. For moisture-proofing, place a sufficient amount
of Silica gel or other desiccating agent inside the covering and inspect replace from time to time.
May 18, 2007-00
