manualshive.com logo in svg

YOKOGAWA AQ6370C, Руководство пользователя, Страница: 60 / 240

Поделиться
Скачать
YOKOGAWA AQ6370C Скачать руководство пользователя страница 60

6-11

IM AQ6370C-17EN

Status Registers

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

Questionable Condition Register

Read

This register can be read by the :STATus:QUEStionable:CONDition? query command. Its 
contents will not be cleared even when read.

Write

The register sets or resets a bit corresponding to a change in the status of the instrument 
only when that change occurs. It cannot be written to. 

Clear

The register cannot be cleared. 

Questionable Event Register

Read

This register can be read by the :STATus:QUEStionable[:EVENt?] query command.
Its contents will be cleared when read.

Write

Contents of the register can be cleared. The register can be cleared but not written to.

Clear

This register will be cleared under any of the following conditions.

•  A read using the :STATus:QUEStionable[:EVENt?] query command
•  Initialization by the :STATus:PRESet command
•  Common *CLS command
•  Power ON

Questionable Event Enable Register

Read

This register can be read by the :STATus:QUEStionable:ENABle? query command. 

Write

The register can be written to by the :STATus:QUEStionable:ENABle command.

Clear

This register will be cleared under any of the following conditions.

•  Data “0” is set using the :STATus:QUEStionable:ENABle command.
•  Power ON

The register cannot be cleared in the following cases. 

•  Receipt of the *RST command
•  Receipt of the *CLS command
•  Device clear (DCL, SDC)

6.5  Questionable Status Register

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов