manualshive.com logo in svg

YOKOGAWA AQ6370C, Руководство пользователя, Страница: 201 / 240

Поделиться
Скачать
YOKOGAWA AQ6370C Скачать руководство пользователя страница 201

8-40

IM AQ6370C-17EN

Program Command Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

RESULT WRITE 

INT:’########.***’

Specifies a filter name and 

savesanalysis results to internal 

memory.

’########.***’: file name

RESULT WRITE 

EXT:’########.***’

Specifies a file name and savesanalysis 

results to internal memory.

’########.***’: file name

RESULT WRITE INT

Saves analysis results in 

internalmemory. File names are 

assignedautomatically.

RESULT WRITE EXT Saves analysis results in 

external memory. File names are 

assignedautomatically.

RESULT  WRITE INT 

@@

Specifies a file name and saves 

analysis results to internal memory 

under the file name specified in the 

variable @@. 

@@: A$, B$, C$, D$

RESULT WRITE EXT 

@@

Specifies a file name and saves 

analysis results to floppy disk under the 

file name specified in the variable @@. 

@@: A$, B$, C$, D$

SEARCH/ANA L1-L2 

###

Sets ON/OFF for the analysis function 

in the range surrounded by line 

markers 1 and 2. 

###: ON/OFF

SEARCH/ANAZOOM 

AREA ###

Selects ON/OFF for the analysis 

function of the display scale range

###: ON/OFF

  1:  Generalized variables E, O, T, U, and V are valid only for the AQ6370C/AQ6370D/

AQ6375B.

MEMORY

Program Command Description

Instrument models on which the 

command is valid, parameter 

ranges, and supported variables.

SAVE #->MEMORY ** Writes the contents of the selected 

TRACE from the specified memory 

number.

0 to 63 (1 step)
#: A, B, C, D, E, F, G

SAVE #->MEMORY @ Writes the contents of the selected 

TRACE from the memory number in 

variable @.

@: E

1

, G, H, I, J, K, O

1

, P, Q, R, S, 

T

1

, U

1

, V

1

, X, Y, Z

#: A, B, C, D, E, F, G

RECALL MEMORY **-

>#

Reads the contents of the selected 

TRACE from the specified memory 

number.

0 to 63 (1 step)
#: A, B, C, D, E, F, G

RECALL MEMORY 

@-># 

Reads the contents of the selected  

TRACE from the memory number in 

variable @.

@: E

1

, G, H, I, J, K, O

1

, P, Q, R, S, 

T

1

, U

1

, V

1

, X, Y, Z

#: A, B, C, D, E, F, G

CLEAR MEMORY **

Clears trace data in the memory

0 to 63 (1 step)

CLEAR MEMORY @ Clears the trace data in the 

memoryspecified by the variable @.

@: E

1

, G, H, I, J, K, O

1

, P, Q, R, S, 

T

1

, U

1

, V

1

, X, Y, Z

  1:  Generalized variables E, O, T, U, and V are valid only for the AQ6370C/AQ6370D/

AQ6375B.

8.3  Program Function Commands

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов