manualshive.com logo in svg

YOKOGAWA AQ6370C, Руководство пользователя, Страница: 19 / 240

Поделиться
Скачать
YOKOGAWA AQ6370C Скачать руководство пользователя страница 19

2-6

IM AQ6370C-17EN

Setting the Command Format

8.

  Perform these steps if you will use AQ6317 commands. Press the 

COMMAND 

FORMAT

 soft key. The command format setting menu is displayed. 

9.

 

Normally, you will enter AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375 or 
AQ6375B. If you wish to use AQ6317 commands, enter AQ6317. 

Explanation

The settings below are used when entering the settings that can be entered using the 
instrument’s panel keys from a controller, or when outputting settings or waveform data 
to the controller. 

GP-IB Address Settings

When in Addressable mode, set the instrument’s address within the following range. 
0 to 30
Each device that can be connected via GP-IB has its own unique GP-IB address. This 
address allows each device to be distinguished from other devices. Therefore, when 
connecting the instrument to a PC or other device, make sure not to set the same 
address on the instrument as any of the other devices. 

Note

•  Do not change an address while the controller or other devices are using GP-IB. 
•  Set addresses other than those used by the GP-IB2 port. 

Command Format Settings

Normally, you will enter AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375 or AQ6375B 
mode. 
If you wish to use the commands of the AQ6317 (another product in the series), enter 
AQ6317. See the appendix for AQ6317 commands that are compatible with the AQ6317. 

Note

Controller functions and TLS address settings are entered when controlling an external device 
using the GP-IB2 port. These settings are invalid for the GP-IB1 port. 

2.4  Setting the GP-IB Address

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов