YOKOGAWA AQ6370C Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 240

YOKOGAWA AQ6370C Скачать руководство пользователя страница 30

3-5

IM AQ6370C-17EN

Ethernet Interface

1

2

3

4

5

6

7

8

App

Index

REMOTE PORT NO. (not used with the VXI-11)

Sets the port number for remote control via ETHERNET. (Default: 10001.)

User Authentication

(not used with the VXI-11)

User authentication is required to connect to the instrument from a PC over an Ethernet
network. If the user name is anonymous, a password is not required. This instrument
supports plain text authentication and the MD5 Message Digest Algorithm by RSA Data
Security, Inc.

Remote Monitoring

You can use the ETHERNET port to monitor the AQ6370C/AQ6370D/AQ6373B/AQ6375B
screen or control the AQ6370C/AQ6370D/AQ6373B/AQ6375B from a PC over a network.
To use this feature, you need remote monitoring software (not included).
For information on remote monitoring software, contact your nearest YOKOGAWA dealer.

Sharing Directories

The user area directory of the AQ6370D/AQ6373B/AQ6375B internal memory can be
shared on a PC.
When the user area directory is shared, the following files can be copied to the PC over
the network.
You cannot save files to the AQ6370D/AQ6373B/AQ6375B.

Timeout Period (AQ6370D (R02.01 or later))

This is enabled when REMOTE INTERFACE is NETWORK (SOCKET).
When a non-communication period reached the set period in a remote state, the
communication is automatically disconnected to enter the local state.
The change in the timeout period resets the time elapsed.
You can set INFINITE (0 second) or 1 through 21600 seconds (six hours).

Remote Control Using Commands

The AQ6370C/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B can be remote controlled
using the LAN port.
For remote commands, use the same commands as those for control via the GP-IB
interface.
AQ6370D (R02.01 or later) also supports control with VXI-11.

Switching Interfaces

Select GP-IB, RS-232C, or ETHERNET as an interface to use for remote control. When
set to ETHERNET, the LAN mode connection status is reset. Otherwise, the connection
is kept open unless closed by the controller.

Remote Commands

As with GP-IB-based remote control, you can select the command format from the
AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375 or AQ6375B mode or from the
AQ6317-compatible mode.

Interrupt by SRQ

An SRQ interrupt does not occur during LAN-based remote control.

3.2 Setting Up Ethernet

«
...
28
29
30
31
32
...
»

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов