manualshive.com logo in svg

YOKOGAWA AQ6370C, Руководство пользователя, Страница: 10 / 240

Поделиться
Скачать
YOKOGAWA AQ6370C Скачать руководство пользователя страница 10

1-1

IM AQ6370C-17EN

Remote Control Functions

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

1.1  Remote Interfaces

This instrument is equipped with the following remote interfaces. 

GP-IB1 (IEEE 488.2, See Chapter 2)

This port is used to connect a controller such as a PC to remote control this instrument. 
Connect a controller or another device controlled by the controller to this port. 
This instrument is controlled using remote commands.
Two types of remote commands are provided: the instrument’s native commands 
complying with SCPI (Standard Commands for Programmable Instruments), and 
commands compatible with the conventional model AQ6317 (see the appendix).
The GP-IB on the AQ6370D/AQ6373B/AQ6375B corresponds to this function.

GP-IB2 (IEEE 488.1, See Chapter 5)

The instrument acts as a controller for remote control of external instruments. Connect 
to the external device to be controlled using the instrument’s program function. This 
functions is not available on the AQ6370D/AQ6373B/AQ6375B.

Ethernet (See Chapter 3)

This port is used to connect a controller such as a PC to control the instrument remotely 
via network. 

RS-232 (See Chapter 4)

This port is used to connect a controller such as a PC to control the instrument remotely. 

GP-IB1 and GP-IB2 Ports

The GP-IB1 and GP-IB2 ports must be used differently for different purposes. 
The GP-IB port on the AQ6370D/AQ6373B/AQ6375B corresponds to the GP-IB1 port. 
The GP-IB2 port is not available on the AQ6370D/AQ6373B/AQ6375B.
The GP-IB1 port is used when controlling the instrument from a PC. 
The GP-IB2 port is used when controlling an external instrument from the AQ6370C/
AQ6373/AQ6375. 
Therefore, please note the following. 
•  A controller such as a PC that is connected to the GP-IB2 port cannot remotely control 

the AQ6370C/AQ6373/AQ6375.

•  Even if a turnable laser source or an external device to be controlled by the AQ6370C/

AQ6373/AQ6375 using program functions is connected to the GP-IB1 port, it cannot 
remote control the AQ6370C/AQ6373/AQ6375. 

•  The GP-IB1 and GP-IB2 ports are independent of each other. Thus, a controller 

connected to the GP-IB1 port cannot directly send a message to an external device 
connected to the GP-IB2 port. 

•  When a PC or other controller is connected to the GP-IB1 port, connecting the GP-IB1 

port with the GP-IB2 port results in improper operation. 

  Do not connect these ports together, or turn OFF the system controller function. 
  The default is ON. 

Chapter 1 

Remote Control Functions

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов