YOKOGAWA AQ6370C Скачать руководство пользователя страница 223 | Manualshive

Страница: 223 / 240

YOKOGAWA AQ6370C Скачать руководство пользователя страница 223

App-2

IM AQ6370C-17EN

Explanation

Because remote control via the GP-IB interface of the /AQ6375 complies with the IEEE
488.2 standard, it is not compatible with the conventional model AQ6317 (complying with
the IEEE 488.1 standard) as to the remote commands and internal actions.
However, by placing the instrument in AQ6317-compatible command mode, you can use
some of the AQ6317 commands. Status register operation also has compatibility with the
AQ6317. When you switch the command mode, it causes all the contents of the status
registers and queues and receive buffer and talker output buffer to be initialized.

Operation in AQ6317-Compatible Mode

The instrument operates as follows when it is remote controlled in the AQ6317-
compatible mode.
•  The majority of AQ6317 control commands and talker commands are available.
•  Talker data is output in the AQ6317-compatible format.
•  To send multiple commands at one time, use a comma “,” as a separator.
•  If receiving multiple query commands in a single line, the instrument outputs only data

relative to the last query command.

Switching Command Modes with Commands

The command mode can also be switched using the following GP-IB commands.
Commands to use when in AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375 or
AQ6375B mode (invalid in the AQ6317-compatible mode)

:SYSTem:COMMunicate:CFORmat<wsp><mode>

<mode> = AQ6317|AQ6370|AQ6370C|AQ6370D|AQ6373|AQ6373B|AQ6375|

AQ6375B|0|1

    AQ6317 = Switch to AQ6317-compatible mode
    AQ6370 = Switch to AQ6370C/AQ6373|AQ6373B|AQ6375/AQ6375B mode
    AQ6370C = Switch to AQ6370C mode (for AQ6370C)
    AQ6370D = Switch to AQ6370D mode (for AQ6370D)
    AQ6373 = Switch to AQ6373 mode (for AQ6373)
    AQ6373B = Switch to AQ6373B mode (for AQ6373B)
    AQ6375 = Switch to AQ6375 mode (for AQ6375)
    AQ6375B = Switch to AQ6375B mode (for AQ6375B)

:SYSTem:COMMunicate:CFORmat?

  0 = AQ6317
  1 = AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375 or AQ6375B
Commands to use when in AQ6317-compatible mode (result in errors when in AQ6370C
/AQ6370D/AQ6373/AQ6373B/AQ6375/AQ6375B mode)
  Control commands

CFORM*

*: 0 = AQ6317-compatible mode, 1 = AQ6370C, AQ6370D, AQ6373, AQ6373B,

AQ6375 or AQ6375B mode

CFORM?

0 = AQ6317-compatible mode, 1 = AQ6370C, AQ6370D, AQ6373, AQ6373B, AQ6375

or AQ6375B mode

AQ6317-Compatible Commands

«
...
221
222
223
224
225
...
»

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов