manualshive.com logo in svg

YOKOGAWA AQ6370C, Руководство пользователя, Страница: 16 / 240

Поделиться
Скачать
YOKOGAWA AQ6370C Скачать руководство пользователя страница 16

2-3

IM AQ6370C-17EN

GP-IB Interface (GP-IB1 Port)

1 

2 

3 

4 

5 

6 

7 

8 

App 

Index 

2.2  GP-IB Interface Function

GP-IB Interface Function

Listener Function

•  All of the same settings can be performed using the interface (except for power ON/

OFF and communication settings) as when using the instrument’s panel keys. 

•  Settings, waveforms, and other data can be received through output commands from 

the controller. 

•  Additionally, you can also receive commands regarding status reports and other data. 

Talker Function

•  Settings, waveforms, and other data can be output.  

Note

Listen only, talk only, and controller functions are not available. 

Switching between Remote and Local

Switching from Local to Remote

When in Local mode, if the instrument received a listen address from the controller that 
sets REN (remote enable) and ATN to “True,” the instrument enters Remote mode. 
•  When in Remote mode, the REMOTE indicator lights. 
•  Keys other than the LOCAL key are disabled. 
•  Settings entered in Local mode are held even if switching to Remote mode. 
•  When an LLO (Local Lock Out) message is received from the controller, the 

instrument enters local lockout status. In LLO status, the LOCAL key is disabled and 
does not return this instrument to Local mode even when pressed. After cancelling the 
local lockout status, press the LOCAL key. To cancel the local lockout status, set REN 
to "False" from the controller. 

Switching from Remote to Local

If you press the LOCAL key when in Remote mode the instrument enters Local mode. 
However, it does not return to Local mode if in the local lockout state. 
•  The REMOTE indicator turns off. 
•  All keys are enabled.
•  Settings entered in Remote mode are held even if switching to Local mode.
•  When a GTL (Go to Local) message is received from the controller, the instrument 

enters Local mode even if REN is set to False.  

Note

The GP-IB interface cannot be used simultaneously with other communication interfaces 
(RS-232, USB, or Ethernet). 

Содержание AQ6370C

















































































































































































































































Отзывы:

Нет отзывов