Yealink Yealink SIP-T26P Скачать руководство пользователя

Страница: 84 / 150

User Guide for the SIP-T26P IP Phone

Answering When Not in Another Call

Call duration and destination will always appear on the LCD screen for the active call.

To answer a call using the handset:

Pick up the handset.

To answer a call using the hands-free speakerphone mode:

Do one of the following:

Press .

With the handset on-hook and headset mode deactivated, press the Answer soft
key.

With the handset on-hook and headset mode deactivated, press the line key (the
line key LED flashes green).

To answer a call using the headset:

Do one of the following:

Press .

With the headset mode activated, press the Answer soft key.

With the headset mode activated, press the line key (the line key LED flashes
green).

Answering When in Another Call

If you have an active call, and an incoming call arrives on the phone, do one of the
following:

Press the Answer soft key.

The incoming call is answered and the original call is placed on hold.

Press to access the new call.

Press or the Answer soft key.

The incoming call is answered and the original call is placed on hold.

To end a call:

Do one of the following:

If you are using the handset, press the Cancel soft key or hang up the handset.

If you are using the headset, press the Cancel soft key.

Содержание Yealink SIP-T26P























































































































































Результаты поиска

Содержание Yealink SIP-T26P

Отзывы:

Похожие инструкции для Yealink SIP-T26P

Бренды по названию

Популярные бренды

Yealink Yealink SIP-T26P, Руководство пользователя

Результаты поиска

Содержание Yealink SIP-T26P

Отзывы:

Похожие инструкции для Yealink SIP-T26P

Бренды по названию

Популярные бренды