Yealink SIP- T28P Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 137

background image

Advanced Phone Features

105

2.

Press the Hold soft key to place the current multicast RTP session on hold.

3.

Press the Cancel soft key to cancel the multicast RTP session.

Note

You can configure the phone to receive a Real Time Transport Protocol (RTP) stream from
the pre-configured multicast address (es) without involving SIP signaling. You can
specify up to 10 multicast addresses that the phone listens to on the network.

You can also change the behavior of how the phone handles incoming multicast paging
calls by configuring specific parameters via web user interface. The specific parameters
are: Paging Barge and Paging Priority Active.

Paging Barge

You can use the paging barge feature to define the priority of the voice call in progress.
If the priority of an incoming multicast paging call is lower than that of the active call,
then it will be ignored automatically. If Disabled is selected from the pull-down list of
Paging Barge, the voice call in progress shall take precedence over all incoming
multicast paging calls. The valid values in the Paging Barge field are:



1 to 10: Define the priority of the active call, 1 is the highest priority, 10 is the lowest
priority.



Disabled: The voice call in progress shall take precedence over all incoming paging
calls.

Paging Priority Active

You can enable or disable this feature to decide how the phone handles the incoming
multicast paging calls, when there is already a multicast paging call on the phone. If
enabled, the phone will ignore the incoming multicast paging call with a lower priority,
otherwise, the phone will play the incoming multicast RTP and place the previous
multicast paging call on hold. If disabled, the phone will automatically ignore all
incoming multicast paging calls.

To configure multicast listening addresses via web user interface:

1.

Click on Contacts->Multicast Paging.

2.

Select the desired value from the pull-down list of Paging Barge.

3.

Select the desired value from the pull-down list of Paging Priority Active.

4.

Enter the multicast IP address (es) and port number(e.g. 224.5.6.20:10008) which the
phone listens for incoming RTP multicast in the Listening Address field.

5.

Enter the label in the Label field. Label will appear on the LCD screen when

Multicast RTP is one way only from sender to the multicast address (es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.

«
...
114
115
116
117
118
...
»

Содержание SIP- T28P










































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIP- T28P

Бренд: Samsung Страницы: 38

Бренд: E-Boda Страницы: 50

Бренд: Panasonic Страницы: 45

Бренд: Dinstar Страницы: 8

Бренд: G53 Limited Страницы: 10

Бренд: Infinix Страницы: 11

Бренд: Archos Страницы: 75

AQUOS ZETA SH-09D

Бренд: Docomo Страницы: 45

Бренд: Med-Pat Страницы: 37

Бренд: Aastra Страницы: 163

STUDIO ENERGY 2

Бренд: Blu Страницы: 20

Бренд: Cellacom Страницы: 22

Linemex ISDK Series

Бренд: Uniphone Страницы: 25

Бренд: CLOUDCONNECT Страницы: 15

Бренд: Zte Страницы: 15

Бренд: Avvio Страницы: 39

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды