Yealink SIP- T28P, Руководство пользователя

Страница: 46 / 137

Customizing Your Phone
35
To place a call from the corporate directory:
1. Press Directory->Remote Phone Book.
2. Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3. Select the desired contact in the corporate directory.
4. Press the Dial soft key.
In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To enable the presentation of caller identity stored in the remote phonebook:
1. Click on Phone->Features->General Information>>.
2. Select Enabled from the pull-down list of SRemote Name.
3. Enter the refresh period of corporate directory in the SRemote Name Flash Time
(seconds) field. The default value is 3600 seconds.
4. Click Confirm to accept the change.
You can access the BroadSoft directory through your phone. You can add local contacts
from the BroadSoft directory. You can also dial a contact from the BroadSoft directory.
You can configure your new phone to access up to 6 BroadSoft directories. Contact your
system administrator for the access URL of the BroadSoft directory.
To configure the BroadSoft phonebook via phone user interface:
1. Press Menu->Features->Broadsoft Settings Menu->Broadsoft Dir Settings.
2. Press or , or the Switch soft key to select the desired BroadSoft item from
the Broadsoft Item field.
3. Enter the parameters: display name, server address, port, username and password
in the corresponding fields.
4. Press the Save soft key to accept the change or the Back soft key to cancel.