Yealink SIP- T28P Скачать руководство пользователя страница 16

Страница: 16 / 137

Overview

Power Indicator LED

LED Status

Description

Solid green

The phone is powered on.

Flashing green

The phone is ringing (Hardware version must be 1.0.0.1
or higher).

Off

The phone is powered off.

Line key LED (private line)

LED Status

Description

Solid green

The line is in conversation.

Fast flashing green

The line receives an incoming call, the phone is ringing.

Slow flashing green

The call is placed on hold.

Off

The line is inactive.

Line key LED (configured as BLF key)

LED Status

Description

Solid green

The monitored user is idle.

Fast flashing green

The monitored user receives an incoming call.

Slow flashing green

The monitored user is busy.

Off

The monitored user does not exist.

Line key LED (shared line)

LED Status

Description

Solid green

The shared line is seized.
The shared line is in conversation.
Some party receives ringback.

Slow flashing green

The shared line conversation is placed on public hold.
The shared line conversation is placed on private hold.

Fast flashing green

The shared line receives an incoming call.
For a multi-party call, all the parties place the shared
line conversation on hold.

Off

The shared line is idle.

Memory key LED (configured as BLF key)

LED Status

Description

Solid green

The monitored user is idle.

Flashing red

The monitored user receives an incoming call.

Solid red

The monitored user is busy.

Off

The monitored user does not exist.

Содержание SIP- T28P










































































































































Результаты поиска

Содержание SIP- T28P

Отзывы:

Похожие инструкции для SIP- T28P

Бренды по названию

Популярные бренды

Yealink SIP- T28P, Руководство пользователя

Результаты поиска

Содержание SIP- T28P

Отзывы:

Похожие инструкции для SIP- T28P

Бренды по названию

Популярные бренды