Yealink SIP-T2 Series, Руководство администратора

Страница: 454 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
432
voice path. These packets use RFC 2833 format and must have a payload type that
matches what the other end is listening for. The payload type for RTP Event packets is
configurable. IP phones default to 101 for the payload type, which use the definition to
negotiate with the other end during call establishment.
The RTP Event packet contains 4 bytes. The 4 bytes are distributed over several fields
denoted as Event, End bit, R-bit, Volume and Duration. If the End bit is set to 1, the
packet contains the end of the DTMF event. You can configure the sending times of the
end RTP Event packet.
INBAND
DTMF digits are transmitted within the audio of the IP phone conversation. It uses the
same codec as your voice and is audible to conversation partners.
SIP INFO
DTMF digits are transmitted by the SIP INFO messages when the voice stream is
established after a successful SIP 200 OK-ACK message sequence. The SIP INFO
message is sent along the signaling path of the call. The SIP INFO message can transmit
DTMF digits in three ways: DTMF, DTMF-Relay and Telephone-Event.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the method of
transmitting DTMF digit and the
payload type.
Parameters:
account.X.dtmf.type
account.X.dtmf.dtmf_payload
account.X.dtmf.info_type
<y0000000000xx>.cfg
Configure the number of times
for the IP phone to send the end
RTP Event packet.
Parameter:
features.dtmf.repetition
Configure the duration time for
DTMF.
Parameter:
features.dtmf.duration