Yealink SIP-T2 Series, Руководство администратора

Страница: 499 / 1009

Configuring Basic Features
477
called), for example, 20150731-1630-Mishoel.JPG was created on July 31, 2015, at 16:30
and you have a call with Mishoel. Screenshot can be viewed on either the phone itself
or on a computer using an application capable of viewing *.JPG files. For more
information, refer to
Yealink_SIP_VP-T49G_User_Guide .
Yealink IP phones also support capturing the screen display of the IP phone using the
action URI. For more information, refer to
Scenario A - Capturing the Current Screen of
the Phone on page 627 .
Note
Procedure
Screenshot feature can be only configured using the configuration files.
Configuration File <y0000000000xx>.cfg
Configure the screenshot feature.
Parameter:
features.screenshot.enable
Details of Configuration Parameters:
Parameter Permitted Values Default
features.screenshot.enable 0 or 1 1
Description:
Enables or disables the screenshot feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can capture screenshots by tapping the Screenshot soft
key or pressing the MESSAGE key during a video call, and the captured screenshots
will be saved to the USB flash drive.
If it is set to 0 (Disabled), you can only capture screenshots by pressing the
MESSAGE key during a video call.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
Recording feature allows users to record active calls (audio calls or video calls) or
If the call is audio-only, you cannot capture the screenshot using USB flash drive.