Yealink SIP-T2 Series, Руководство администратора

Страница: 252 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
230
You can ask the distributor or Yealink FAE for replace rule template. You can also obtain
the replace rule template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
. For more
information on obtaining the replace rule template, refer to Obtaining Configuration
Files and Resource Files on page 52 .
When editing a replace rule template file, learn the following:

<DialRule> indicates the start of the template file and </DialRule> indicates the
end of the template file.

When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line ID. Multiple line IDs are separated by commas. It is not applicable to
SIP-T19(P) E2 and CP860 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model Values Description
SIP
VP-T49G/SIP-T48G/T46G/
T29G
0~16
0 stands for all lines
1~16 stand for line1~line16
SIP-T42G 0~12
0 stands for all lines
1~12 stand for line1~line12
SIP-T41P/T27P/T27G 0~6
0 stands for all lines
1~6 stand for line1~line6
SIP-T40P/T23P/T23G 0~3
0 stands for all lines
1~3 stand for line1~line3
SIP-T21(P) E2 0~2
0 stands for all lines
1~2 stand for line1~line2

At most 100 replace rules can be added to the IP phone.
The expression syntax in the replace rule template is the same as that introduced in
the section
Dial Plan on page 226 .
To customize a replace rule template:
1. Open the template file using an ASCII editor.
2. Create replace rules between <DialRule> and </DialRule>.