Yealink SIP-T2 Series, Руководство администратора

Страница: 600 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
578
Parameters Permitted Values Default
calls when there is an active multicast paging call on the IP phone.
If it is set to 1 (Enabled), the IP phone will receive the incoming multicast paging call
with a higher or equal priority and ignore that with a lower priority.
Web User Interface:
Directory->Multicast IP->Paging Priority Active
Phone User Interface:
None
multicast.receive_priority.priority Integer from 0 to 10 10
Description:
Configures the priority of the voice call (a normal phone call rather than a multicast
paging call) in progress.
1 is the highest priority, 10 is the lowest priority.
0-Disabled
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
9-9
10-10
If it is set to 0 (Disabled), all incoming multicast paging calls will be automatically
ignored when a voice call is in progress.
If it is not set to 0 (Disabled), the IP phone will receive the incoming multicast
paging call with a higher or same priority than this value and ignore that with a
lower priority than this value when a voice call is in progress.
Web User Interface:
Directory->Multicast IP->Paging Barge
Phone User Interface:
None
To configure a listening multicast address via web user interface:
1. Click on Directory->Multicast IP.