manualshive.com logo in svg

YASKAWA MP3000 Series, Руководство по установке, Страница: 78 / 326

Поделиться
Скачать
YASKAWA MP3000 Series Скачать руководство пользователя страница 78

2.3  Connecting Devices

2.3.5  USB Connector Connection

2-50

Removing the USB Memory Device

Use the STOP/SAVE switch to remove USB memory.

After you lightly press and release this switch, the USB memory can be safely removed when 
the USB status indicator changes from flashing to not lit.

Note: Press and hold this switch for at least 2 seconds to save all of the data to the USB memory. The display will 

show the progress of saving.

Before removing the USB memory device, press the STOP/SAVE switch and wait until the USB 
status indicator goes out. If the USB memory device is removed while the USB status indicator is 
lit or flashing, the data may become corrupted.

STOP/SAVE switch

Open the cover.

Note

Содержание MP3000 Series







































































































































































































































































































































Отзывы:

Нет отзывов