5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
5-50
•
Details
Use the
Details
Option to specify a register for triggering the trace.
No.
Item
Description
Details
Use this option to specify the register (Bit, Word, Float, or Long) to use to trigger the trace.
You can freely create the desired combination of conditions to start and stop the trace.
Initiate
Enter any register and value to start the trace.
If the initiate trigger is not specified, tracing will start at the same time as the sampling.
Condition
Select from the following operators:
Opera-
tor
Trigger
>
<
=
<>
>=
<=
A trigger occurs when the register value is greater than the comparison value.
A trigger occurs when the register value is less than the comparison value.
A trigger occurs when the register value is equal to the comparison value.
A trigger occurs when the register value is not equal to the comparison value.
A trigger occurs when the register value is greater than or equal to the compari-
son value.
A trigger occurs when the register value is less than or equal to the comparison
value.
Terminate
Enter any register and value to start the trace.
If a terminate trigger is not specified, tracing will continue until the sampling stops.
No. of
Delays
Set the number of samplings to execute after the terminate trigger condition has been met
and before the trace is stopped.
Содержание MP3000 Series
Страница 153: ...4 1 User Program Types and Execution Timing 4 1 2 Motion Programs 4 20 Ladder Program Example...
Страница 212: ...5 4 Tuning 5 70 5 4 1 Using SigmaWin When Using a Servo 5 70 5 4 2 Using DriveWizard Plus When Using an Inverter 5 70...
Страница 274: ...5 3 Monitoring Machine Operation 5 3 3 Realtime Tracing 5 64...