YASKAWA MP3000 Series, Руководство по установке, Страница: 223 / 326

5.1 Debugging Ladder Programs
5.1.5 Searching and Replacing in Project Files
5-13
5
Debugging Programs
Replacing in Project Files
1.
Bring the program to search to the front of the Ladder Editor, and then select
Edit −
Replace in the project
from the menu bar.
The Replace in the Project Dialog Box will be displayed.
2.
Specify the address of the variable to search for and the name of the program to search.
Note: 1. You can also enter the variable by copying it from the Variables Pane.
2. Use commas and spaces to specify more than one program in the
Target Program
Box. The follow-
ing wildcard (*) combinations can also be used in the
Target Program
Box: *, H*, L*, I*, A*, F* (all
functions), MPM*, MPS*, SPM*, and SPS*. Other uses, such as “H01.*”, are not allowed.
3.
Click the
Register
or
Address
Tab to set the search criteria and the replacement value.
Register Tab Page: Allows you to replace registers.
Address Tab Page: Allows you to replace registers that meet the specified criteria.
Note: The following wildcard (*) combinations can also be used in the
Target Program
Box:
*, H*, L*, I*, A*, F*, MPM*, and MPS*.
4.
Start the search/replace operation.
Click the
Replace All
Button. The replacement results will be displayed in the Output Pane.
Note: If an error occurs during compilation of a program, the replacements will not be completed.
After the replacement operation, the variables and addresses of the registers that were replaced will
be displayed.
After you perform a replace operation on a project file, the project file will be compiled and saved,
and there will be no way to return to the previous version. Always create a backup before per-
forming replacements on important files.
Note