2
Conveyor Condition File
2.11Editing the WORK IN/NOT SHIFT Condition File
2-22
165553-1CD
HW1482183
Conveyor Synchronized
Funciton with Shift
Functions
2.11
Editing the WORK IN/NOT SHIFT Condition File
2.11.1 Display the WORK IN/NOT SHIFT Condition File
2.11.2 Edit the WORK IN/NOT SHIFT Condition File
Selecting “USED STATUS”
Selecting “PORT NO.”
Specifying “CHATTERING PREVENTION DISTANCE”
Specifying “CHATTERING PREVENTION TIME”
Specifying “WORK SHIFT POSITION”
Specifying “MAX. WORK FIND COUNT”
Specifying “WORK IN/NOT SIGNAL”
Select {ROBOT} under the main menu
Select {CONVEYOR COND SUPP.}
Select {DISPLAY}
Select “WORK IN/NOT SHIFT”
1)
1 Press the [PAGE] to display the next file
number.
Press [SHIFT] + [PAGE] to display the
previous file number.
Select “USED STATUS”
“USED” or ”NOT USED” is selected alternately
Select “PORT NO.”
The selection dialog appears Select a desired port number
Select “CHATTERING PREVENTION DISTANCE”
Enter a value by pressing
[Numeric keys]
Select “CHATTERING PREVENTION TIME”
Enter a value by pressing
[Numeric keys]
Select “WORK SHIFT POSITION”
Enter a value by pressing [Numeric keys]
Select “MAX. WORK FIND COUNT”
Enter a value by pressing [Numeric keys]
Select “WORK IN/NOT SIGNAL”
Enter a number by pressing [Numeric keys]
NOTE
Editing the WORK IN/NOT SHIFT condition file clears both
the shift data and the synchronization data.
Observe the above precaution when modifying the WORK
IN/NOT SHIFT condition file.
42 of 98
