6 Related Drive Parameters
YASKAWA ELECTRIC
TOBP C730600 83C YASKAWA AC Drive Option SI-C3 Installation Manual
33
F6-03
<3>
Comm External Fault
(EF0) Select
Selects drive response for external fault
input (EF0) detection during option
communications.
–
When installed to drives:
0: Ramp to stop.
1: Coast to stop.
2: Fast Stop
3: Alarm only.
<3>
Default: 1
Range: 0 to 3
When installed to energy-saving units:
1: Stop
3: Alarm Only
Default: 1
Range: 1, 3
F6-04
bUS Error Detection Time
Set the maximum time the drive should
wait for a communication error to occur
(bUS).
Default:
0.0 s
<6>
Min.: 0.0 s
Max.: 5.0 s
F6-06
<7> <8>
Torque Reference/Limit by
Comm
Enabling this parameter allows d5-01 to
determine whether the value is read as the
Torque Limit value (d5-01 = 0) or the
Torque Reference value (d5-01 = 1).
0: Disabled
1: Enabled
<9>
Default: 0
Range: 0, 1
F6-07
–
MultiStep Ref Priority
Select
0: MultiStep References Disabled
1: MultiStep References Enabled
Default: 0
Range: 0, 1
F6-08
Comm Parameter Reset
@Initialize
Selects whether communication-related
parameters F6-
and F7-
are set
back to original default values when the
drive is initialized using parameter A1-03.
0: No Reset - Parameters retained
1: Reset - Back to factory default
Note: The setting value is not changed
even when F6-08 is set to 1 and the drive is
initialized using A1-03.
Default:0
Range: 0, 1
F6-10
<10> <11>
<12>
CC-Link Node Address
Sets the node address.
Default: 0
Min.: 0
Max.: 64
F6-11
<10>
CC-Link Communication
Speed
Sets the communications speed.
0: 156 kbps
1: 625 kbps
2: 2.5 Mbps
3: 5 Mbps
4: 10 Mbps
Default: 0
Range: 0 to 4
F6-14
CC-Link bUS Error Auto
Reset
Enables or disables the Option
Communication Error Auto Reset.
0: Disabled
1: Enabled
Default: 0
Range: 0, 1
O: Applicable, –: Not applicable, INV: Drive, CNV: Energy-Saving Unit
No.
INV CNV
Name
Description
Values
TOBP_C730600_83C_3_0_E.fm 33 ページ ２０１８年１０月２４日 水曜日 午後５時５９分
