Yamato DF Series, Инструкция по эксплуатации

Страница: 59 / 72

56
MAINTENANCE AND INSPECTION
Daily check/care
WARNING
・
Before starting inspection or maintenance, disconnect the power plug from the receptacle.
・
Conduct inspection and maintenance only after the oven has cooled down.
・
Never attempt to disassemble devices.
Caution
●
Wipe off any dirt with a well wrung out soft cloth. Never use benzene, thinner, or scorching
powder or rub with a hard brush. Otherwise, deformation, deterioration, or discoloration may
result.
Monthly servicing
●
Examine short circuit breaker function.
・
Put power supply code in and test it with electricity turned on.
・
First, turn on short circuit breaker.
・
Next, press red test button on short circuit breaker by using the point of ballpoint pen
etc. If short circuit is turns off, then it is normal.
●
Check the operation of the independent overheat preventive device.
・
After executing the fixed temperature operation at the set temperature 0
℃
, set the
operation temperature of the Independent Temperature Overheating Prevention
Device to 0
℃
.
・
Under normal circumstances, the heater circuit is cut off in a few seconds and the
TROUBLE lamp and flashes at the same time, and the alarm buzzer
sounds if the alarm buzzer function is ON.
※
Be sure to perform operation check for the electric leakage breaker and the
independent overheat preventive device before a long time operation or unmanned
operation during nighttime.
LONG STORAGE AND DISPOSAL
When you do not use the oven for a long period of time
CAUTION WARNING
Long Storage and Disposal
●
Disconnect the power plug from the
receptacle.
When you dispose of the oven
●
Do not leave it where children can access.
Remove the knob and hinges of the door to
disable the door locking system.