Yamato DF Series, Инструкция по эксплуатации

Страница: 10 / 72

7
BEFORE USING IT
REQUIREMENTS FOR INSTALLATION
CAUTION
Handling of power code.
Do not use the power cord if it is bundled or tangled. If it is used in this manner, it
can overheat and fire may be caused.
Do not process, bend, wring, or stretch the power cord forcibly. Fire or electrical shock
may result.
Do not put the power cord under the desk, chair, etc., or through an object. Fire or
electrical shock may be caused.
Do not run the power cord next to heating equipment such as a heater. The cover of
the cord may melt and fire or electrical shock may result.
When the power cord is damaged (exposure of the core wires, disconnection, etc.), turn
off the power key right immediately, then turn off the circuit breaker and the main
power. Contact customer service for a replacement immediately. If this procedure is
not followed, fire or electrical shock may be caused.
Connect the power cord to a adequate distribution board or outlet.
Caution for setting shelves
Do not use any shelves but the attached ones.
If it is used in this manner, the oven cannot occasionally regulate temperatures
properly.
Put the attached shelves on the shelf brackets fitted to the chamber when you use the
oven.