Yamato DF Series, Инструкция по эксплуатации

Страница: 7 / 72

4
BEFORE USING IT
To install and preparation before using
WARNING
1. Always ground the unit
Be sure to connect the earth wire (the green cable of power cord) to the grounding
conductor or ground terminal to prevent accidents caused by electric leakage.
Ask the nearest electrical contractor for the power including the connecting work. The
setting (connecting) work is performed following the related electrical equipment
technical standard published by the corresponding country to be used this unit.
Electrical specifications of ModelDF811/DF1011 and DH811/DH1011 are 3-phase 220V.
Connect to a distribution board or 220V outlet surely.
2. Choose a proper place for installation.
Do not install the oven in a place where:
・
Flammable gas or corrosive gas is generated.
・
Ambient temperature exceeds 35
℃
・
Ambient temperature fluctuates violently.
・
There is direct sunlight.
・
There is excessive humidity.
・
There is a constant vibration.
Keep the following clearance around the oven.
3. Operation with ventilation
When using this machine with ventilation (with Damper opened) it is required to make sure
of full ventilation around the place. Without enough ventilation around the machine a hot
air from its exhaust opening will raise room temperature or the room can be filled with
smoke and gas discharged from its materials. Therefore do not forget to connect an exhaust
duct at its exhaust opening in order to discharge a blast wind outside. We can offer exhaust
pipe flange and exhaust dust as an option by request.
1m and more
60 cm
and more
60 cm
and more
1m and more