Yamato DF Series, Инструкция по эксплуатации

Страница: 11 / 72

8
PRECAUTIONS IN HANDLING
WARNING
Substances that can not be used
Never use explosive substances, flammable substances or substances that include
explosive or flammable ingredients in the unit. Explosion or fire may occur. (Please
refer to “List of dangerous materials” on page 65.)
Prohibition of use for error
If a smoke or abnormal smell may be occurred, turn off the power switch of the main unit
immediately, and turn off the original power source, and finally contact to either the dealer
you purchased this unit or our sales office. Leaving the failure may cause the fire or
electric shock. Since the repairing of this unit is dangerous for non-specified service
person, never repair the unit by the customer himself.
Do not put the foreign substances in the oven
Do not put a foreign substances such as metals or flammable substances in the opening
of the unit (ventilation hole, exhaust port, etc.). If this procedure is not followed, fire,
electrical shock or burn may result.
If the foreign substances enter the unit, turn off the circuit breaker immediately and
contact a service technician for inspection. If this procedure is not followed, fire,
electrical shock or burn may result.
Caution for handling samples
During and immediately after operation, the internal surfaces of the chamber and the
door are extremely "HOT". To prevent injury, take out the samples when the chamber
has cooled down or wear gloves while the chamber is still hot.
When you open the door during working at the high temperature.
Do not touch the internal surfaces of the chamber and the door when you will open the
door, because they are extremely hot.
To open the door while the chamber is still hot may cause the malfunction of a fire
detector if it is installed near the oven.
Do not touch heated parts
.
Do not touch the door and exhaust port during or immediately after operation. Severe
burning injury may be caused due to the high temperature