Yamato DF Series, Инструкция по эксплуатации

Страница: 23 / 72

20
・
When fixed temperature operation starts, heater will work on and off according to setup
temperature. When heater is on, “HEATER” lamp flashes. “FIX TEMP” lamp will change
from blink to flash.
Setup Temp100
℃↑
1999-09-17 12:10
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
During fixed temperature operation, sub display indicates temperature and you can see
blinking display of arrow sign, which indicates the condition of temperature control. The
direction of arrow sign will be as follows according to the relationship between setup
temperature when fixed temperature operation starts and temperature of the inside of
chamber.
Setup Temp
１００℃↑
１９９９－０９－１７ １２：１５
（
When setup temperature is higher than that of the inside of chamber
）
Setup Temp
１００℃↓
１９９９－０９－１７ １２：１５
（
When setup temperature is lower than that of the inside of chamber
）
・
The direction of arrow sign will be as follows when temperature of the inside of chamber
becomes higher or lower by 2.5
℃
that setup temperature.
Setup Temp
１００℃→
１９９９－０９－１７ １２：３０
（
When temperature of the inside of chamber reaches setup temperature
）
4. How to “Stop”
・
Press “POWER” key to stop operation.
POWER