Yamato DF Series, Инструкция по эксплуатации

Страница: 17 / 72

14
DESCRIPTION AND FUNCTION OF EACH PART
Control Panel
ERROR
℃
DOOR
Standby
End
Heater
Fan
Fixed temp
Auto-start
Auto-stop
Program
1 2 3 4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
POWER
MEMU PROGRAM MODE
No. Name Description
1 MODE key
Key to select a function from program input, edit,delete modes,hour/time setting,
change-over mode, and other functions.
2 PROGRAM key
Starting/Closing of program menus
3 MENU key
Key to select the operation mode. Each mode of fixed temprature,
auto-start,auto-stop and program operation can be selected.
4 POWER key
Key to change over the controller from the standby mode to the operation mode or
from the operation mode to the standby mode.
5 Jog dial Key to select menu items, compile parameters, etc.
6 Main Display
It displays temperatyre measurements,set values (temperature, time, hour, etc.),
program information, error information, etc.
7 Sub Display
It displays set temperture, remaining time, current hour and execution segment
No. etc.
8
℃
lamp It comes ON when displaying temperature of the inside of tank at main display
9 ERROR lamp It comes ON when any trpuble within equiment.
10 DOOR lamp It comes ON to indicate that door is being opened.
(not provided on this unit).
11 STANDBY lamp
It comes ON in the standby mode and blinks in the preoperational state.
12 END lamp It blinks at the end of auto-stop/program operation.
13 HEAT lamp The lamp comes ON when the heater is energized.
14 FAN lamp The lamp comes ON when the fan is energized.
15 FIXED-TEMP
It comes ON while it is operated at fixed temperature. It blinks when operation
mode is selected.
16 AUTO-START
It comes ON to indicate that auto start is carried out. It blinks when operation
mode is selected.
17 AUTO-STOP
It comes ON to indicate that auto stop is carried out. It blinks when operation mode
is selected.
18 PROGRAM lamp
It comes ON to indicate that program operation is carried out. It blinks when
operation mode is selected.